Brand: Taco
SKU: 008-VDTSF6-1
Taco 008-VDTSF6-1, Series 008, (Variable Speed), Delta-T Stainless Steel Circulator Pump, 1/25 HP, 115 Volt
Taco 008-VDTSF6-1
Taco Variable Speed Delta-T Circulator's all-in-one design combines a microprocessor based variable speed differential controller with the reliability and convenience of our 00 Cartridge Circulators. Simply dial in the design Delta-T of the system or zone (from 5-50°F) and then sit back and watch the circulator automatically adjust its performance to match the systems ideal BTU/hr output, while conserving energy and eliminating velocity noise.
No matter how good your original system design and heat loss calculations were, they included estimates and rules of thumb. Your system needs a circulator that automatically adjusts to deliver the optimal heat transfer based on the actual operation of the system, every day, under all load conditions even when those conditions change. With the Taco Variable Speed Delta-T 00 circulators you simply dial in your desired temperature drop across the system or zone (5-50°F), attach a supply and return sensor directly to the pump and it will automatically vary its performance to deliver optimal heat, efficiency and comfort.
Features:
- All-in-one pump & control
- Sensors included
- Easy to install: attach 2 sensors, dial in the desired Delta-T
- ULa pproved
- Snap-in PC board, replaceable
- LED status panel
- Fuse protected
- Plug-in low voltage wiring terminal
- Increases system efficiency
- Pump always runs at minimum required speed
- Eliminates velocity noise
- Eliminates need for a pressure by-pass valve
- Conserves energy
- Achieves system design goals, even when installed system varies from original design
- Pump automatically adjusts to current system conditions
- Spend less time figuring out pressure drop (for proper pump sizing) when servicing existing systems
- Pump exercise
- Delivers ideal BTU/hr heat transfer for all styles of emitters
- Stainless steel construction
Note: Full flange-to-flange three-year warranty on all 00 Series circulators.
The Following Was Added To Your Shopping Cart
| Item | Description | Qty | Unit Price |
|---|---|---|---|
|
Taco 008-VDTSF6-1, Series 008, (Variable Speed), Delta-T Stainless Steel Circulator Pump, 1/25 HP, 115 Volt | 1 | $630.15/each |
Description
Taco 008-VDTSF6-1
Taco Variable Speed Delta-T Circulator's all-in-one design combines a microprocessor based variable speed differential controller with the reliability and convenience of our 00 Cartridge Circulators. Simply dial in the design Delta-T of the system or zone (from 5-50°F) and then sit back and watch the circulator automatically adjust its performance to match the systems ideal BTU/hr output, while conserving energy and eliminating velocity noise.
No matter how good your original system design and heat loss calculations were, they included estimates and rules of thumb. Your system needs a circulator that automatically adjusts to deliver the optimal heat transfer based on the actual operation of the system, every day, under all load conditions even when those conditions change. With the Taco Variable Speed Delta-T 00 circulators you simply dial in your desired temperature drop across the system or zone (5-50°F), attach a supply and return sensor directly to the pump and it will automatically vary its performance to deliver optimal heat, efficiency and comfort.
Features:
- All-in-one pump & control
- Sensors included
- Easy to install: attach 2 sensors, dial in the desired Delta-T
- ULa pproved
- Snap-in PC board, replaceable
- LED status panel
- Fuse protected
- Plug-in low voltage wiring terminal
- Increases system efficiency
- Pump always runs at minimum required speed
- Eliminates velocity noise
- Eliminates need for a pressure by-pass valve
- Conserves energy
- Achieves system design goals, even when installed system varies from original design
- Pump automatically adjusts to current system conditions
- Spend less time figuring out pressure drop (for proper pump sizing) when servicing existing systems
- Pump exercise
- Delivers ideal BTU/hr heat transfer for all styles of emitters
- Stainless steel construction
Note: Full flange-to-flange three-year warranty on all 00 Series circulators.
Specifications
Please see the manuals for specifications on this item
Manuals
Reviews
Write Your Own Review
Compatibility
Related Products
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.Call our sales counter for Assistance, Price Quotes, Availability & To Place an Order
Inspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
Why Don't We Show The Price?
MAP ("Minimum Advertised Price")
Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price").
Since our price for this product is lower than MAP, the manufacturer does not allow us to display our lowest price until you place the product in the shopping cart. This allows us to continue offering our lowest prices while staying consistent with product manufacturers policy.</p> <p class="text-justify">This process does not require you to purchase the product - it can be easily removed from shopping cart if needed.
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
PRICE MATCH
GUARANTEE
PumpProducts.com is dedicated to always offering the best value to our customers. We will match the price, at the time of purchase, on a Price Match Guarantee product if you find the same item at a lower price at a Designated Major Online Retailer or at a local retail competitor's store.
Here's how:
- If you find a qualifying lower price online, call 800-429-0800 and direct a customer service agent to the website with the lower price, or when visiting a PumpProducts.com store, one of our employees will assist you.
- On qualifying products, PumpProducts.com will then verify the current price to complete the price match.
PRICE MATCH CONDITIONS
- The manufacturer and model number must be identical.
- PumpProducts.com will match prices of direct competitors. Our direct competitors include any retailer who sells products in both retail stores and online under the same name. PumpProducts.com will also gladly match price on any items sold by Amazon.com (but not by a third party on Amazon.com). For further clarification, market place sellers on websites not their own are not considered direct competitors.
- Membership clubs are not considered direct competitors.
- When matching a competitor, PumpProducts.com will follow any limitations and exclusions set by the competitor.
- The item must be first quality. PumpProducts.com does not match prices on seconds or refurbished items.
- PumpProducts.com does not match prices on clearance items, closeouts, liquidation sales or pricing errors.
- Competitor product must be available and in-stock at time of price match request. Price match does not apply to items promoted as “limited time,” “limited quantity,” “while supplies last” or any similar language.
- PumpProducts.com reserves the right to limit quantities on a price match to one per customer.
- A customer can choose between the PumpProducts.com price with a coupon/offer OR the competitor price but may not use a coupon/offer with the competitor price unless the competitor would accept it.
-
A manufacturer’s coupon may be used in combination with a price match.
Note: Any coupon that is issued from a retailer or brand that also has retail stores is considered a competitor coupon, not a manufacturer coupon. - Price Match guarantee is valid on price of item only, not on shipping and/or handling charges.