Brand: Baldor
SKU: VESWDM3554
Baldor VESWDM3554, Paint Free Motor, 1-1/2 HP, 230/460 Volts, 2.1 Amps, 3 Phase, 1755 RPM, 60 Hz, TEFC Enclosure, 56C Frame, C-Face, 3534M Motor Type, Stainless Steel Frame
Baldor Paint Free Motor
“Paint-Free” Washdown Duty motors are designed for applications where use of caustic cleaning solutions and regular high-pressure wash downs may compromise the surface of a painted motor.
Features
- Special processed cast endplates
- 300 Series stainless steel motor frame, base, shaft & hardware
- Labyrinth seal on the drive end
- 3 year warranty
- TEFC or TENV
Applications
- Conveyors
- Pumps
Note: Picture is illustrative and may not reflect the actual product
Key Features:
Description
Baldor Paint Free Motor
“Paint-Free” Washdown Duty motors are designed for applications where use of caustic cleaning solutions and regular high-pressure wash downs may compromise the surface of a painted motor.
Features
- Special processed cast endplates
- 300 Series stainless steel motor frame, base, shaft & hardware
- Labyrinth seal on the drive end
- 3 year warranty
- TEFC or TENV
Applications
- Conveyors
- Pumps
Note: Picture is illustrative and may not reflect the actual product
Specifications
| Brand | Baldor |
| Mfg. Number | VESWDM3554 |
| Product Type | Paint Free Motor |
| Horsepower | 1-1/2 HP |
| Voltage | 230/460 Volts |
| Phase | 3 |
| Frequency | 60 Hz |
| Synchronous Speed | 1800 RPM |
| Speed | 1755 RPM |
| Current | 4.4 A @ 208 V, 4.2 A @ 230 V, 2.1 A @ 460 V |
| Speed Code | Single Speed |
| Enclosure | TENV |
| High Voltage Full Load Amps | 2.1 Amps |
| Frame Size | 56C |
| Motor Type | 3534M |
| Number of Poles | 4 |
| Motor Standards | NEMA |
| Frame Material | Stainless Steel |
| Overall Length | 12.95 in |
| Pulley Face Code | C-Face |
| Service Factor | 1.15 |
| Efficiency @ 100% Load | 86.50% |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Duty Rating | CONT |
| Starting Method | Direct on line |
| Design Code | B |
| Inverter Code | Inverter ready |
| Auxillary Box | No Auxillary Box |
| KVA Code | K |
| Base Indicator | No Mounting |
| Bearing Grease Type | POLYREX EM (-20F +300F) |
| Shaft Diameter | 0.625 in |
| Insulation Class | F |
| Drip Cover | No Drip Cover |
| Heater Indicator | No heater |
| Shaft Extension Location | Pulley End |
| Shaft Rotation | Reversible |
| Motor Lead Exit | KO Box |
| Ambient Temperature | 40 °C |
| Motor Lead Termination | Flying Leads |
| Agency Approvals | CSA, CSA, EEV UR |
| Rodent Screen | No |
| Power Factor | 76 |
| Pulley End Bearing Type | Sealed |
| Shaft Slinger Indicator | No Slinger |
| Vibration Sensor Indicator | No Vibration Sensor |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |