Brand: Little Giant
SKU: 554401
Little Giant 554401, Model VCMA-15UL, Automatic Condensate Removal Pump, 1/50 HP, 115 Volts, 65 GPH
Little Giant's VCMA-15UL Automatic Condensate Removal Pump
Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
Feautures:
- 1/2 gallon collection tank
- Vertical centrifugal pump design
- Automatic start and stop operation
- 3/8" O.D. barbed discharge adapter with built-in check valve
- Three 1-1/8" diameter inlet openings (two fitted with removable cap plug)
- Thermally protected, fan cooled motor
- Built-in wall mount tabs on tank
- Removable pump float locking tab for safety during transportation (remove at time of installation)
- 6 ft, 3-conductor cable with grounded 3-prong plug
- Suitable for high-efficiency, gas furnace condensate
Product Specifications:
- Motor - 1/50 HP
- Flow - 65 GPH @ 1' of head
- 3/8" O.D. barbed discharge adapter
- Intermittent Liquid Temp. up to - 120°F
- Discharge - 3/8" OD barbed
- Housing - ABS
- Cover - ABS
- Volute - ABS
- Impeller - Glass filled polypropylene
- 15' shut-off head
- 6' power cord
- 3 drain holes
- Electrical - 115 V, 60 Hz, 1 Amp, 60 Watts
- Weight - 4.4 lbs
- Height - 7"
- Width - 5"
- Length - 11"
Description
Little Giant's VCMA-15UL Automatic Condensate Removal Pump
Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
Feautures:
- 1/2 gallon collection tank
- Vertical centrifugal pump design
- Automatic start and stop operation
- 3/8" O.D. barbed discharge adapter with built-in check valve
- Three 1-1/8" diameter inlet openings (two fitted with removable cap plug)
- Thermally protected, fan cooled motor
- Built-in wall mount tabs on tank
- Removable pump float locking tab for safety during transportation (remove at time of installation)
- 6 ft, 3-conductor cable with grounded 3-prong plug
- Suitable for high-efficiency, gas furnace condensate
Product Specifications:
- Motor - 1/50 HP
- Flow - 65 GPH @ 1' of head
- 3/8" O.D. barbed discharge adapter
- Intermittent Liquid Temp. up to - 120°F
- Discharge - 3/8" OD barbed
- Housing - ABS
- Cover - ABS
- Volute - ABS
- Impeller - Glass filled polypropylene
- 15' shut-off head
- 6' power cord
- 3 drain holes
- Electrical - 115 V, 60 Hz, 1 Amp, 60 Watts
- Weight - 4.4 lbs
- Height - 7"
- Width - 5"
- Length - 11"
Specifications
Please see the manuals for specifications on this item