Brand: Goulds
SKU: M05411
Goulds M05411, CentriPro 4" Motor, Generation 1 Series, 1/2 HP, 115 Volts, 1 Phase, 44 Amps, 3 Wire, Stainless Steel Construction
Goulds M05411 Generation 1 Series Three-Wire Motor
This copper wound 4" submersible motor is designed and sized for the installation in 4 inch diameter or larger water wells. This three wire motor has a capacitor start induction run design and requires a control box with a starting relay and capacitor.
Features
- Stainless steel casing and upper and lower end bells
- Three-shoe Kingsbury thrust bearing
- Stainless steel, 17-4 PH splined shaft
- Removable, replaceable 48 inch motor lead held in place by (2) screws for controlled compression
- Built-in check valve allows well water to enter motor as needed
- Automatic reset on winding thermal overload protection
- Surge arrestors built-in
- CSA Certified, tested to ANSI/NSF 61
- NEMA Mounting Dimensions
- Please note that this 3-wire motor requires a control box
Control Panel Options
Below is the Goulds control panel that can be used with this motor:
Key Features:
Description
Goulds M05411 Generation 1 Series Three-Wire Motor
This copper wound 4" submersible motor is designed and sized for the installation in 4 inch diameter or larger water wells. This three wire motor has a capacitor start induction run design and requires a control box with a starting relay and capacitor.
Features
- Stainless steel casing and upper and lower end bells
- Three-shoe Kingsbury thrust bearing
- Stainless steel, 17-4 PH splined shaft
- Removable, replaceable 48 inch motor lead held in place by (2) screws for controlled compression
- Built-in check valve allows well water to enter motor as needed
- Automatic reset on winding thermal overload protection
- Surge arrestors built-in
- CSA Certified, tested to ANSI/NSF 61
- NEMA Mounting Dimensions
- Please note that this 3-wire motor requires a control box
Control Panel Options
Below is the Goulds control panel that can be used with this motor:
Specifications
| Brand | Goulds |
| Mfg. Number | M05411 |
| Product Type | Motor |
| Application | Water systems |
| Horsepower | 1/2 HP |
| Voltage | 115 Volts |
| Phase | 1 |
| Power | 0.37 kW |
| Frequency | 60 Hz |
| Service Factor | 1.6 |
| Locked Rotor Amps | 44 |
| Main Winding Resistance | 1-1.4 Ohms |
| Start Winding Resistance | 2.5-3.1 Ohms |
| Thrust Rating | 700 |
| Rotation | Counterclockwise |
| Standard Control Box | CB05411 |
| Design | Water lubricated |
| Construction Material | 304 Stainless steel construction |
| Shaft Material | 17-4 PH splined stainless steel |
| Motor Type | 3 Wire |
| Max Water Temperature | 86°F |
| Length | 9.6" |