Brand: Baldor
SKU: JMEWDM3558T
Baldor JMEWDM3558T, Closed-Coupled Pump Motor, 2 HP, 208-230/460 Volts, 2.5 Amps, 3 Phase, 3490 RPM, 60 Hz, TEFC Enclosure, 145JM Frame, C-Face, 3526M Motor Type, Steel Frame
Baldor Closed-Coupled Pump Motor
Our close-coupled pump Washdown Duty motors are for commercial and industrial water pump applications, or food processing applications that are exposed to high-pressure washdowns.
Features
- Oversized ball bearings with locked drive end
- TEFC or TENV
- White washdown or SSE Stainless steel
Applications
- Pumps
Note: Picture is illustrative and may not reflect the actual product
Key Features:
Description
Baldor Closed-Coupled Pump Motor
Our close-coupled pump Washdown Duty motors are for commercial and industrial water pump applications, or food processing applications that are exposed to high-pressure washdowns.
Features
- Oversized ball bearings with locked drive end
- TEFC or TENV
- White washdown or SSE Stainless steel
Applications
- Pumps
Note: Picture is illustrative and may not reflect the actual product
Specifications
| Brand | Baldor |
| Mfg. Number | JMEWDM3558T |
| Product Type | Closed-Coupled Pump Motor |
| Horsepower | 2 HP |
| Voltage | 208-230/460 Volts |
| Phase | 3 |
| Frequency | 60 Hz |
| Synchronous Speed | 3600 RPM |
| Speed | 3490 RPM |
| Speed Code | Single Speed |
| High Voltage Full Load Amps | 2.5 Amps |
| Enclosure | TEFC |
| Frame Size | 145JM |
| Motor Type | 3526M |
| Motor Standards | NEMA |
| Number of Poles | 2 |
| Pulley Face Code | C-Face |
| Frame Material | Steel |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Overall Length | 15.43 in |
| Service Factor | 1.15 |
| Efficiency @ 100% Load | 85.50% |
| Duty Rating | CONT |
| Inverter Code | Inverter ready |
| Auxillary Box | No |
| Base Indicator | Rigid |
| Bearing Grease Type | POLYREX EM (-20F +300F) |
| Current | 5.3 A @ 208 V, 5.0 A @ 230 V, 2.5 A @ 460 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Heater Indicator | No heater |
| KVA Code | M |
| Motor Lead Exit | KO Box |
| Motor Lead Termination | Flying Leads |
| Rodent Screen | No |
| Shaft Diameter | 0.875 in |
| Insulation Class | F |
| Power Factor | 88 |
| Pulley End Bearing Type | Sealed |
| Shaft Extension Location | Pulley End |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Starting Method | Direct on line |
| Vibration Sensor Indicator | No Vibration Sensor |
| Thermal Device - Bearing | No |
| Thermal Device - Winding | No |
| Ambient Temperature | 40 °C |
| Agency Approvals | CSA, CSA, EEV, UR |