Brand: BJM
SKU: 201470
BJM 201470, SK Series, Model SK22C-208T, Submersible Shredder Pump, 3 HP, 208 Volts, 3 Phase, 3450 RPM, 3" NPT Discharge, 240 Max. GPM, 59 ft. Max Head, Cast Iron, 33 ft. Cord
BJM's Electric Submersible Shredder Pump (SK Series) is specially designed to shear through tough solids in Municipal, Industrial and Agricultural wastewater. It is equipped with a Tungsten Carbide-tipped cutting impeller that runs against a spiral-shaped diffuser plate to cut through even the toughest solids, leaving them slightly larger than if passed through a grinder pump. The BJM Shredder Pump is capable of shredding and passing almost any solid.
Features
- 304SS Motor Housing allows for superior abrasion resistance and will not wear out like aluminum motor housings when pumping sandy water.
- Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
- Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
- Standard 33ft. power cord.
Applications
- Schools
- Sports Centers
- Shopping Malls
- Amusement Parks
- Airports
- Hospitals
- Dairies
- Feed Lots
- Camp Grounds
- Industrial Parks
- Spill Containment
- Wash Down
The submersible SK Series pumps are designed to pump wastewater and industrial wastewater that includes up to 10% by volume of solids. They are not explosion-proof and should not be used to pump volatile or flammable liquids. Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.
The Following Was Added To Your Shopping Cart
| Item | Description | Qty | Unit Price |
|---|---|---|---|
|
BJM 201470, SK Series, Model SK22C-208T, Submersible Shredder Pump, 3 HP, 208 Volts, 3 Phase, 3450 RPM, 3" NPT Discharge, 240 Max. GPM, 59 ft. Max Head, Cast Iron, 33 ft. Cord | 1 | $5,330.00/each |
Description
BJM's Electric Submersible Shredder Pump (SK Series) is specially designed to shear through tough solids in Municipal, Industrial and Agricultural wastewater. It is equipped with a Tungsten Carbide-tipped cutting impeller that runs against a spiral-shaped diffuser plate to cut through even the toughest solids, leaving them slightly larger than if passed through a grinder pump. The BJM Shredder Pump is capable of shredding and passing almost any solid.
Features
- 304SS Motor Housing allows for superior abrasion resistance and will not wear out like aluminum motor housings when pumping sandy water.
- Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
- Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
- Standard 33ft. power cord.
Applications
- Schools
- Sports Centers
- Shopping Malls
- Amusement Parks
- Airports
- Hospitals
- Dairies
- Feed Lots
- Camp Grounds
- Industrial Parks
- Spill Containment
- Wash Down
The submersible SK Series pumps are designed to pump wastewater and industrial wastewater that includes up to 10% by volume of solids. They are not explosion-proof and should not be used to pump volatile or flammable liquids. Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.
Specifications
Please see the manuals for specifications on this item
Manuals
Reviews
Write Your Own Review
Compatibility
Call our sales counter for Assistance, Price Quotes, Availability & To Place an Order
Inspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
Why Don't We Show The Price?
MAP ("Minimum Advertised Price")
Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price").
Since our price for this product is lower than MAP, the manufacturer does not allow us to display our lowest price until you place the product in the shopping cart. This allows us to continue offering our lowest prices while staying consistent with product manufacturers policy.</p> <p class="text-justify">This process does not require you to purchase the product - it can be easily removed from shopping cart if needed.
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
PRICE MATCH
GUARANTEE
PumpProducts.com is dedicated to always offering the best value to our customers. We will match the price, at the time of purchase, on a Price Match Guarantee product if you find the same item at a lower price at a Designated Major Online Retailer or at a local retail competitor's store.
Here's how:
- If you find a qualifying lower price online, call 800-429-0800 and direct a customer service agent to the website with the lower price, or when visiting a PumpProducts.com store, one of our employees will assist you.
- On qualifying products, PumpProducts.com will then verify the current price to complete the price match.
PRICE MATCH CONDITIONS
- The manufacturer and model number must be identical.
- PumpProducts.com will match prices of direct competitors. Our direct competitors include any retailer who sells products in both retail stores and online under the same name. PumpProducts.com will also gladly match price on any items sold by Amazon.com (but not by a third party on Amazon.com). For further clarification, market place sellers on websites not their own are not considered direct competitors.
- Membership clubs are not considered direct competitors.
- When matching a competitor, PumpProducts.com will follow any limitations and exclusions set by the competitor.
- The item must be first quality. PumpProducts.com does not match prices on seconds or refurbished items.
- PumpProducts.com does not match prices on clearance items, closeouts, liquidation sales or pricing errors.
- Competitor product must be available and in-stock at time of price match request. Price match does not apply to items promoted as “limited time,” “limited quantity,” “while supplies last” or any similar language.
- PumpProducts.com reserves the right to limit quantities on a price match to one per customer.
- A customer can choose between the PumpProducts.com price with a coupon/offer OR the competitor price but may not use a coupon/offer with the competitor price unless the competitor would accept it.
-
A manufacturer’s coupon may be used in combination with a price match.
Note: Any coupon that is issued from a retailer or brand that also has retail stores is considered a competitor coupon, not a manufacturer coupon. - Price Match guarantee is valid on price of item only, not on shipping and/or handling charges.