Brand: Bell & Gossett
SKU: 1EF055LF
Bell & Gossett 1EF055LF, Be610T, e-60 Series, In-Line Centrifugal Pump, 1/2 HP, 208-230/460 Volts, 3 Phase, (2" x 2" x 5.25") Size, 125 GPM Max, 18 ft Max Head, 4.125 Impeller, Bronze Volute
Bell & Gossett e-60 In-Line Mounted Centrifugal Pump
The series e-60 is a three-piece in-line centrifugal pump designed for heating and cooling, potable water, and other fluid transfer applications in the residential and commercial markets.
Features
- Permanently lubricated pump and motor bearings—no regreasing needed
- Class-leading hydraulic efficiency
- Upgraded unitized mechanical seal
- Dimensional interchangeability with legacy Series 60
- Space saving in-line mounting
- Easy serviceability—motor, coupler, seal and impeller can all be repaired or replaced without removing the pump from its piping
- Quiet operation
- Robust mechanical seal
- Suction and discharge companion flanges included
- 3 year warranty
Key Features:
Description
Bell & Gossett e-60 In-Line Mounted Centrifugal Pump
The series e-60 is a three-piece in-line centrifugal pump designed for heating and cooling, potable water, and other fluid transfer applications in the residential and commercial markets.
Features
- Permanently lubricated pump and motor bearings—no regreasing needed
- Class-leading hydraulic efficiency
- Upgraded unitized mechanical seal
- Dimensional interchangeability with legacy Series 60
- Space saving in-line mounting
- Easy serviceability—motor, coupler, seal and impeller can all be repaired or replaced without removing the pump from its piping
- Quiet operation
- Robust mechanical seal
- Suction and discharge companion flanges included
- 3 year warranty
Specifications
| Frequency | Bell & Gossett |
| Speed | 1EF055LF |
| Current | Be610T |
| Enclosure | e-60 |
| Frame Size | Circulator |
| Motor Orientation | Hydronic systems |
| Number of Poles | 1/2 HP |
| Mounting Type | 208-230/460 Volts |
| Frame Material | 3 |
| Overall Length | 60 Hz |
| Service Factor | 1750 RPM |
| Efficiency @ 100% Load | Open Drip Proof |
| Duty Rating | 2" x 2" x 5.25" |
| Overload Protector | 125 GPM |
| Electrical Type | 18 ft |
| Starting Method | 4.125 |
| Design Code | ASTM B584 |
| KVA Code | Cast bronze |
| Frame Length | Steel |
| Shaft Diameter | EPR/Carbon/Silicon-Carbide |
| Insulation Class | Flanged |
| Opp Drive End Bearing | 175 psi (12 bar) |
| Drive End Bearing | 250°F |
| Shaft Extension Location | 3 years |