Brand: AMT
SKU: 4242-95
AMT 4242-95, Heavy Duty Centrifugal Pump, 7-1/2 HP, 2" NPT Suction, 1-1/2" NPT Discharge, 500 GPM, Single Phase, 213JM Frame, 230 Volts, Cast Iron, Buna-N/Stainless Steel Shaft Seal
AMT- Heavy Duty Straights
AMT Heavy Duty Solids Handling End Suction Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability that makes the unit useful inapplications involving up to 1/8" diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.
Features:
• Buna-N Mechanical Seal and O-Ring on Cast Iron Models
• Viton Mechanical Seal and O-Ring on Stainless Steel and Bronze Models
• Optional Silicon Carbide SealsAvailable
• Front Drain Plugs Located 90°Apart
• Maximum Head 194 Feet (84 PSI)
• Maximum Flow 500 GPM
• 2 HP to 15 HP NEMA Motors, Single and Three Phase
• Optional Mounting Base Available
Key Features:
The Following Was Added To Your Shopping Cart
| Item | Description | Qty | Unit Price |
|---|---|---|---|
|
AMT 4242-95, Heavy Duty Centrifugal Pump, 7-1/2 HP, 2" NPT Suction, 1-1/2" NPT Discharge, 500 GPM, Single Phase, 213JM Frame, 230 Volts, Cast Iron, Buna-N/Stainless Steel Shaft Seal | 1 | $2,710.00/each |
Description
AMT- Heavy Duty Straights
AMT Heavy Duty Solids Handling End Suction Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability that makes the unit useful inapplications involving up to 1/8" diameter solids and muddy or dirty liquids, as well as clean, clear fluids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.
Features:
• Buna-N Mechanical Seal and O-Ring on Cast Iron Models
• Viton Mechanical Seal and O-Ring on Stainless Steel and Bronze Models
• Optional Silicon Carbide SealsAvailable
• Front Drain Plugs Located 90°Apart
• Maximum Head 194 Feet (84 PSI)
• Maximum Flow 500 GPM
• 2 HP to 15 HP NEMA Motors, Single and Three Phase
• Optional Mounting Base Available
Specifications
| Brand | AMT |
| Mfg. Number | AMT-4242-95 |
| Series | Heavy Duty Straights |
| Product Type | Straight Centrifugal Pump |
| Application | Industrial & Commercial Pumps |
| Horsepower | 7-1/2 HP |
| Phase | 1 Phase |
| Voltage | 230 Volts |
| Frequency | 60 Hz |
| Enclosure Type | TEFC |
| Suction Port Size | 2" NPT |
| Discharge Port Size | 1-1/2" NPT |
| Material | Cast Iron |
| Shaft Seal Material | Buna-N/Stainless Steel |
| Max. Working Pressure | 150 PSI |
| Max. Temperature | 180°F |
| Max. Head | 194 Ft. |
| Max. Solids Diameter | 1/4" |
| Max. Flow rate | 500 GPM |
| Frame Size | 213JM |
| Full Load Amps | 32 Amps |
| Length | 26" |
| Width | 14.6" |
| Height | 11.1" |
| RPM | 3450 RPM |
Manuals
Reviews
Write Your Own Review
Compatibility
Call our sales counter for Assistance, Price Quotes, Availability & To Place an Order
Inspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
Why Don't We Show The Price?
MAP ("Minimum Advertised Price")
Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price").
Since our price for this product is lower than MAP, the manufacturer does not allow us to display our lowest price until you place the product in the shopping cart. This allows us to continue offering our lowest prices while staying consistent with product manufacturers policy.</p> <p class="text-justify">This process does not require you to purchase the product - it can be easily removed from shopping cart if needed.
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
PRICE MATCH
GUARANTEE
PumpProducts.com is dedicated to always offering the best value to our customers. We will match the price, at the time of purchase, on a Price Match Guarantee product if you find the same item at a lower price at a Designated Major Online Retailer or at a local retail competitor's store.
Here's how:
- If you find a qualifying lower price online, call 800-429-0800 and direct a customer service agent to the website with the lower price, or when visiting a PumpProducts.com store, one of our employees will assist you.
- On qualifying products, PumpProducts.com will then verify the current price to complete the price match.
PRICE MATCH CONDITIONS
- The manufacturer and model number must be identical.
- PumpProducts.com will match prices of direct competitors. Our direct competitors include any retailer who sells products in both retail stores and online under the same name. PumpProducts.com will also gladly match price on any items sold by Amazon.com (but not by a third party on Amazon.com). For further clarification, market place sellers on websites not their own are not considered direct competitors.
- Membership clubs are not considered direct competitors.
- When matching a competitor, PumpProducts.com will follow any limitations and exclusions set by the competitor.
- The item must be first quality. PumpProducts.com does not match prices on seconds or refurbished items.
- PumpProducts.com does not match prices on clearance items, closeouts, liquidation sales or pricing errors.
- Competitor product must be available and in-stock at time of price match request. Price match does not apply to items promoted as “limited time,” “limited quantity,” “while supplies last” or any similar language.
- PumpProducts.com reserves the right to limit quantities on a price match to one per customer.
- A customer can choose between the PumpProducts.com price with a coupon/offer OR the competitor price but may not use a coupon/offer with the competitor price unless the competitor would accept it.
-
A manufacturer’s coupon may be used in combination with a price match.
Note: Any coupon that is issued from a retailer or brand that also has retail stores is considered a competitor coupon, not a manufacturer coupon. - Price Match guarantee is valid on price of item only, not on shipping and/or handling charges.