Brand: AMT
SKU: 316A-95
AMT 316A-95, Self-Priming Sewage/Trash Pumps, 3 HP, 2" NPT (Suction and Discharge), 3 Phase, 230/460 Volts, Cast Iron, Viton Silicon/Carbide Shaft Seal
AMT 2" to 4" Sewage Trash Pumps
AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes: 2", 3" or 4". Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.
Features
- Cast Iron Construction
- Silicon Carbide/Viton Mechanical Seal
- 2", 3" & 4" NPT Ports Sizes
- Maximum Temperature 180° F
- Self-Priming to 20 Ft.
- Stainless Steel Semi-Open, Clog Resistant Impeller
- Buna-N Check Valve and O-Ring
- Removable Cast Iron Volute/Wearplate
- Easy Cleanout Design
- 3" & 4" Models Feature Front Cleanout
- Pull-from-Rear Design
- Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
Key Features:
The Following Was Added To Your Shopping Cart
| Item | Description | Qty | Unit Price |
|---|---|---|---|
|
AMT 316A-95, Self-Priming Sewage/Trash Pumps, 3 HP, 2" NPT (Suction and Discharge), 3 Phase, 230/460 Volts, Cast Iron, Viton Silicon/Carbide Shaft Seal | 1 | $1,388.33/each |
Description
AMT 2" to 4" Sewage Trash Pumps
AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes: 2", 3" or 4". Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.
Features
- Cast Iron Construction
- Silicon Carbide/Viton Mechanical Seal
- 2", 3" & 4" NPT Ports Sizes
- Maximum Temperature 180° F
- Self-Priming to 20 Ft.
- Stainless Steel Semi-Open, Clog Resistant Impeller
- Buna-N Check Valve and O-Ring
- Removable Cast Iron Volute/Wearplate
- Easy Cleanout Design
- 3" & 4" Models Feature Front Cleanout
- Pull-from-Rear Design
- Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
Specifications
| Description | Self-Priming Sewage/Trash Pumps, 3 HP, 2" NPT (Suction and Discharge), Cast Iron, Viton Silicon/Carbide Shaft Seal |
| Brand | AMT |
| Mfg. Number | 316A-95 |
| Series | 2" to 4" Sewage Trash Pumps |
| Product Type | Self-Priming Electric Pumps |
| Application | Sewage Treatment |
| Horsepower | 3 HP |
| Phase | 3 Phase |
| Enclosure Type | TEFC |
| Frame Size | 56J |
| Voltage | 230/460 Volts |
| Frequency | 60 Hz |
| RPM | 3450 RPM |
| Material | Cast Iron |
| Shaft Seal Material | Viton Silicon/Carbide |
| Full Load Amps | 8/4 Amps |
| Suction Ports Size | 2" NPT |
| Discharge Ports Size | 2" NPT |
| Length | 19.9" |
| Width | 9.3" |
| Height | 8.8" |
| Self -primes | 20 Ft. |
| Max. Temperature | 180°F |
| Max. Working Pressure | 150 PSI |
Manuals
Reviews
Write Your Own Review
Compatibility
Call our sales counter for Assistance, Price Quotes, Availability & To Place an Order
Inspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
Why Don't We Show The Price?
MAP ("Minimum Advertised Price")
Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price").
Since our price for this product is lower than MAP, the manufacturer does not allow us to display our lowest price until you place the product in the shopping cart. This allows us to continue offering our lowest prices while staying consistent with product manufacturers policy.</p> <p class="text-justify">This process does not require you to purchase the product - it can be easily removed from shopping cart if needed.
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
PRICE MATCH
GUARANTEE
PumpProducts.com is dedicated to always offering the best value to our customers. We will match the price, at the time of purchase, on a Price Match Guarantee product if you find the same item at a lower price at a Designated Major Online Retailer or at a local retail competitor's store.
Here's how:
- If you find a qualifying lower price online, call 800-429-0800 and direct a customer service agent to the website with the lower price, or when visiting a PumpProducts.com store, one of our employees will assist you.
- On qualifying products, PumpProducts.com will then verify the current price to complete the price match.
PRICE MATCH CONDITIONS
- The manufacturer and model number must be identical.
- PumpProducts.com will match prices of direct competitors. Our direct competitors include any retailer who sells products in both retail stores and online under the same name. PumpProducts.com will also gladly match price on any items sold by Amazon.com (but not by a third party on Amazon.com). For further clarification, market place sellers on websites not their own are not considered direct competitors.
- Membership clubs are not considered direct competitors.
- When matching a competitor, PumpProducts.com will follow any limitations and exclusions set by the competitor.
- The item must be first quality. PumpProducts.com does not match prices on seconds or refurbished items.
- PumpProducts.com does not match prices on clearance items, closeouts, liquidation sales or pricing errors.
- Competitor product must be available and in-stock at time of price match request. Price match does not apply to items promoted as “limited time,” “limited quantity,” “while supplies last” or any similar language.
- PumpProducts.com reserves the right to limit quantities on a price match to one per customer.
- A customer can choose between the PumpProducts.com price with a coupon/offer OR the competitor price but may not use a coupon/offer with the competitor price unless the competitor would accept it.
-
A manufacturer’s coupon may be used in combination with a price match.
Note: Any coupon that is issued from a retailer or brand that also has retail stores is considered a competitor coupon, not a manufacturer coupon. - Price Match guarantee is valid on price of item only, not on shipping and/or handling charges.