Myers Pumps Buyer Guides

Myers SK50 Series Sewage Pumps Buyers Guide & Review

Myers Pumps Buyer Guides

May 06, 2019

Myers SK50 Series Sewage Pumps Buyers Guide & Review

Myers SK50 submersible sewage ejector pumps are specifically designed to meet the demands of commercial and residential sewage or sump applications. The SK50 can handle capacities up to 120 gallons per minute and heads to 24 feet.

Features

Carbon/ceramic mechanical seal
Oil-filled motor with automatic reset thermal overload for maximum protection (one phase models)
Upper and lower single-row ball-bearing construction
Non-clogging, two-vane, semi-open cast iron impeller
Includes wide-angle "piggyback" float switch
Split phase motor with thermal overload protection
Cast iron motor housing and pump casing construction
2" solids handling

Applications

Commercial sewage
Residential sewage
High-capacity sump
Septic tank effluent

MYERS SK50 SERIES SEWAGE PUMPS

myers sk50 series centrifugal sewage pumps

Myers SK50 Series Sewage Pumps

Model Comparison Chart

Model	Discharge (NPT)	HP	Voltage	Phase	GPM	Max. Head
MSK50M1 10	2"	1/2	115	1	120	24'
MSK50A1 10	2"	1/2	115	1	120	24'
MSK50M1 20	2"	1/2	115	1	120	24'
MSK50M2 20	2"	1/2	230	1	120	24'
MSK50A1 20	2"	1/2	115	1	120	24'

PERFORMANCE CURVE

PARTS LIST

DIMENSIONS

INSTALLATION DIAGRAM

SPECIFICATIONS

BROCHURE

Myers SK50 Series Sewage Pump Brochure

INSTALLATION MANUAL

Myers SK50 Series Sewage Pump Installation Manual

CURVES

Myers SK50 Series Sewage Pump Curves

Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Latest Blogs

Tips & How-To Topics

December 13, 2024

Grinder Pump or Sewage Pump? Find the Best Fit for Your Wastewater System

Each household’s wastewater system requirements are different and depend on a number of underlying factors. Flow rate, regulatory compliance, plumbing system, solid content, and daily requirements matter a lot. This is why choosing the right pump can help increase reliability and efficiency and reduce frequent repairs. There are two common types of wastewater pumps: sewage pump and grinder pump. Read this full blog to find which is the best fit for your wastewater system. What is a Grinder Pump? This type of pump is perfect for you if your house is unable to pass the waste through natural gravity. A grinder pump works by grinding the household waste from toilets, sinks and washing machines. This waste is then directed to the nearest municipal sewer system. It works with the use of a float switch, which turns the motor on once the desired level of waste is reached. The pump then starts to chop the waste into a slurry, which can be easily managed by the sewage system. The best benefit of these pumps is their ability to handle solid waste. Unlike other pumps, grinder pumps are perfect for managing low-density solid waste. Additionally, these are highly efficient for long-distance waste transport without the need for a slope. However, it is recommended not to flush diapers, hygiene products, oil, laundry, plastic and metal. The metal blades in this pump can handle small solids, but heavier solids can lead to pump failure. Mindfully using a grinder pump can save money on costly repairs and frequent maintenance. What is a Sewage Pump? Unlike a grinder pump, which can only handle a low volume of waste, a sewage pump can handle more. These are also called ejector pumps and work by rotating an impeller. This device uses an electric motor, which helps in generating pressure. This allows the fluid waste to flow up through an impeller, which leads to the discharge pipe. Additionally, the cast iron coating of these pumps allows them to be highly reliable to transfer untreated waste. A sewage pump is a preferred choice for the wastewater management industry and municipal corporations. This is because it is designed to allow the waste to pass through the pipes. This ability allows it to withstand challenging fluids and high flow rates. Such a pump is perfect for commercial applications, including factories, malls, and manufacturing industries. This helps in unclogging the pipes and directing the wastewater away from the commercial buildings. Key Differences Between Grinder and Sewage Pumps The following are some key differences between a grinder pump and a sewage pump: Point of Difference Grinder Pump Sewage Pump Performance These pumps work well in residential settings and can handle low-density solid waste. These pumps are suitable for commercial settings and offer a high flow rate. These can handle a decent amount of solid waste. Size Can pass the solids for 1-1/4 inches. Can handle solids up to 2 inches in diameter. Capabilities These are best suited for a smaller volume of waste of round 35-70 gallons per minute. Have high capabilities and can pump up to 200 gallons of raw waste per minute. Maintenance Needs Every month proper cleaning must be done to avoid blockages in pump components. Monitoring the pump performance and proper lubrication of bearings can help in increasings it performance. Cleaning the intake and discharge pipe is important to avoid clogging. The pump seals must be replaced if they show signs of damage. The impeller must be clean to avoid noises and performance issues. Lifespan 8-10 years 5-7 years Power Consumption 500-1200 watts 1/3 hp watts Choosing the Right Pump for Your System Grinder Pump If you are looking for a reliable pump to manage grey water for residential use, a grinder pump is best. You can consider this pump for low-density waste. If the pipe is smaller, this pump is highly recommended as it can handle pressure. If your slope is not inclined to connect with the main system, these can work well. Sewage Pump Commercial and heavy applications can work well with a sewage pump. Wastewater with larger solid waste can use this type of pump. These pumps can work effectively with larger pipes as they can handle challenging waste. Additionally, if you are not connected to the main system, these pumps can help. Conclusion Selecting the best pump for the wastewater system requires many prior considerations and factors. You must understand the nature of the solid waste, energy requirements, pipe fittings, and size and distance. For further guidance and clarity, you can consult experts such as BJM Shredder Pumps. This can offer you tailored advice and help in resolving all doubts. This way, you can understand if you should buy a grinder pump or a sewage pump.

Tips & How-To Topics

December 27, 2023

5 Things to Consider Before Purchasing or Using a Trash Pump

Trash pumps are generally used in various industries, including mining, agriculture, flood control, and construction. They are popular for their ability to pump large volumes of liquids containing solids or debris. Hence, they are used to pump mud or sand, storm debris, or pond water sludge. They come in various sizes and pump capacities. Some are heavy-duty, restricted to one site, while others are portable, allowing you to carry them across multiple job sites. Heavy-duty pumps are commonly used in industrial settings. Hence, you must consider various factors before using or purchasing a trash pump. Understanding Your Needs Trash pumps can move fluids from point A to point B at standard pressure. You’ll need a high-head pump to move it with high pressure. Some of the typical applications of trash pumps include the following: Dewatering Dampening sites for dust control Creek diversion Flood control Watering fields Wastewater treatment Sewer bypass projects Mining operations Therefore, you must identify your pumping requirements to choose the suitable trash pumps for your project. Hence, consider the following. Size of the Solids Different pumps are designed to handle various sizes of solids. For example, trash pumps designed for 1-inch solids will not pump fluids with two or 3-inch solids. Choosing the wrong pump will lead to clogging and work delays. Hence, the design of the impeller plays a significant role. Alternatively, you can consider trash pumps with built-in screens or filters to prevent larger solids from passing through. Size of Piping It would help if you considered friction loss while choosing a trash pump. Small hose sizes will lead to more significant friction loss. Accordingly, you must consider the fluid volume being moved to size the appropriate trash pump. Generally, 3-inch pumps ensure a flow rate of 200 gallons per minute (GPM), while 18-inch pumps can move between 10,000 to 11,000 GPM. Both hose size and volume go hand in hand to achieve the necessary flow rate. 1. Pump Capacity and Power There are different types of trash pumps, including submersible, diaphragm, and centrifugal pumps. Each comes with its unique features, suitable for specific conditions. They also have different pump capacity and power. For example, centrifugal trash pumps can lift fluids to 25 feet, while trailer-mounted trash pumps may lift them as high as 150 feet. Moreover, other factors play into consideration, such as the volume of water, the nature of debris, and head height. You need a high-capacity pump for larger volumes, abrasive debris, and higher head heights. Accordingly, trash pumps have different power options. You can choose from electric, gasoline, and diesel trash pumps according to your needs and preferences. Electric pumps are recommended for areas with access to electricity, while the others are preferred for portability and fuel efficiency. 2. Portability and Mobility Some projects may require mobility as you would need to move it between different job sites to ensure the project’s completion. Hence, the size and weight of the trash pumps become a crucial factor. Smaller and more portable trash pumps are available but often have lower capacities. However, they are easy to maneuver and transport. Some pumps have additional features, such as wheels or handles, to make transportation easier. Larger heavy-duty trash pumps often come with the option to be pulled behind a trailer. Their design also plays a crucial role in its maneuverability. 3. Durability and Build Quality Trash pumps are designed using different materials for different purposes. Common ones include cast iron, stainless steel, aluminum, and plastics or composites. Cast iron trash pumps have increased durability and wear resistance, which is common in heavy-duty units. Stainless steel plays an essential role in handling corrosive substances. Accordingly, aluminum offers the right balance of strength and portability. Plastic and composite trash pumps are often used in less demanding applications. They are lightweight and may provide resistance to certain chemicals. 4. Ease of Maintenance Regular maintenance ensures trash pumps operate at peak efficiency, experience fewer breakdowns, and enhance longevity. Accordingly, neglecting its maintenance can lead to increased wear and tear, reduced efficiency, and frequent breakdowns. Therefore, trash pumps with user-friendly maintenance features should be considered. Most trash pumps have additional features to provide easy access to essential cleaning, inspection, and repair components. It can reduce the time and effort for routine maintenance. You should also check for availability of replacement parts to ensure less downtime. Accordingly, you must ensure its maintenance activities are laid out in its documentation and user manuals. Some manufacturers provide technical support, tutorials, and online resources to help with the trash pump’s maintenance. 5. Safety Features Trash pumps have different safety features to protect the equipment and the operator. They are necessary to ensure the pump’s longevity and prevent accidents. Standard safety features include overload protection, automatic shut-off, and safety switches. Overload protection helps prevent the motor from burning out when the pump operates beyond its capacity. It allows the pump to avoid overheating or mechanical failures. Automatic shut-offs deactivate the pump when it detects an anomaly, such as the pump running dry, a drop in oil pressure, or overheating. Accordingly, safety switches function as emergency stop buttons, allowing operators to turn them off during emergencies. They are necessary to prevent equipment damage or accidents. Other safety features include thermal protection, leakage sensors, and ensuring a stable and durable site for installation. Conclusion To summarize, various trash pumps are suited for specific needs and usage. You need to consider multiple factors, including pump capacity, size and type of debris, volume of fluid, and piping size. Accordingly, you can consider its power options, portability, durability, ease of maintenance, and safety features. You must scope your project’s needs and requirements to size the right trash pump for your usage appropriately.

Tips & How-To Topics

October 27, 2023

Choosing the Perfect Chopper Pump: A Buyer's Guide

Various types of water pumps are used for different household and commercial applications. In this range, chopper pumps are a popular name. They strategically help to chop all entering solids before pumping the water. This amazing application can be used in wastewater treatment, food processing, and agriculture. But the trick is to buy the right chopper pump according to your needs. Here is a complete buyer's guide on choosing the perfect chopper pump. Chapter 1: Understanding Chopper Pumps Chopper pumps are types of centrifugal pumps that can handle fluid having various kinds of solids. The pump has cutting blades made of hard materials of fixed and spinning elements that macerate solids before they enter the impeller. The solids are cut in such a way that they can easily pass through the pump. It has various parts: an impeller with blades or knives, a motor, and a cutting mechanism. As soon as the impeller rotates, the blades effectively cut solid materials in the fluid. This breakdown ensures smooth operation and zero blockages. Chapter 2: Applications of Chopper Pumps Here are some applications of chopper pumps: Wastewater Treatment: Treating wastewater is one of the biggest applications of chopper pumps. It is used to treat sewage and wastewater to cut all the solids. This ensures there is no pipe clogging due to debris. Food Processing: Food waste is treated with chopper pumps in various food processes. This ensures there are no blockages and future problems. Agriculture: It's used in irrigation systems, animal waste processing, etc. Also, the chopper pumps are used in the automatic /steel industry, mining/sand & gravel processes, paper and wood products, chemical/petrochemical, and other sectors. Chapter 3: Types of Chopper Pumps Here are popular types of chopper pumps: Submersible chopper pumps: They are placed in the fluid they are pumping. The advantages of this system are that they are compact and suitable for applications with limited space. Also, they are more efficient and produce less noise. However, they may be more costly than external ones and require a waterproof case during installation. External chopper pumps: The external chopper pumps are installed outside the fluid source and connected through pipes. These are perfect for easy maintenance and care. Also, they are cheaper than the submersible ones. Chapter 4: Key Factors to Consider Here are some key factors to consider before choosing chopper pumps: Type of fluid: The pumps should be able to handle the kind of fluid and solids you will deal with. The build quality should handle the small to large particles as required. The flow rate: The fluid rate should be compatible with the pumps. It should be able to handle the volume efficiently. Head pressure: Head pressure is the vertical distance the pump must lift the fluid. The selected pump should be able to handle head pressure. Maintenance requirements: Getting a pump that can be easily maintained and repaired is a plus point. Chapter 5: Selecting the Right Size To select the right size of the chopper pump, you have to consider the flow rate, head pump, and type of material it will deal with. You should go for a larger pump if the work is extensive. Considering the flow rate(in GPM or m³/h) and the total dynamic head (in feet or meters) would be best. Flow rate is the volume of liquid pumped, and the head is the complete opposition the pump must overcome, including vertical and horizontal distances. Also, you should use a large pump if you handle viscous fluids. Chapter 6: Material Selection It would be best if you went for the pumps with corrosion-resistant and durable material. Also, if you deal with a special liquid, it should not react with pump material. So, always go for durable, reliable, and corrosion-resistant material. It will help you prolong the life of the pump. Chapter 7: Energy Efficiency While buying the chopper pump, you should check its efficiency rating. A high-efficiency machine will reduce energy consumption, lead to low bills, and is also a good environment. So always read the manual mentioning the energy efficiency details. Chapter 8: Maintenance and Service After buying the right chopper pump according to your needs, it's important to take proper care of it. You should clean it and check for debris, dust, wiring, and unusual noises. It's best to seek professional advice and refer to user guidelines. Chapter 9: Conclusion The tip for selecting the right chopper pump is that it should be compatible with your present and future needs. Also, the size, material, etc, should withstand the process. So, consider all the factors mentioned above and choose the best one. You can check out Pump Products, the authorized pumps, pump parts, and accessories suppliers. You can call, get assistance, and prompt delivery of any pump.

Tips & How-To Topics

August 25, 2023

Understanding Bell & Gossett Series e-60 Centrifugal Pumps

Centrifugal pumps have been ideally preferred across industries as hydraulic machine that converts mechanical energy to hydraulic energy through the centrifugal force on the liquids. From surface and water treatment to heavy-duty industrial applications, these pumps have been used for diverse applications. To get the best out of centrifugal pumps, it's important to use a product that's energy-efficient and reliable to use. It should also be feature-rich with all the relevant specifications to deliver the best performance. When we talk about these parameters, Bell & Gossett Series e-60 centrifugal pumps certainly deliver the same. Here's a brief up: Overview of Bell & Gossett Speaking of brands that are literally the chartbusters for centrifugal pumps, Bell & Gossett tops the list for obvious reasons. Not only are they highly-reputed and professional manufacturers of HVAC, but their products feature other fluid-handling equipment as well. As a brand, Bell & Gossett focuses on innovation/quality. Due to their sincere commitment to such parameters, they have gained a strong customer base across the world. Introduction to Bell & Gossett Series e-60 Centrifugal Pumps Bell & Gossett Series e-60 is a three-piece centrifugal pump that helps with heating/cooling, potable water, and fluid transfer applications. It's integrated with an upgraded mechanical seal, dimensional interchangeability, and series e-60 ECM for seamless variable speed control. The pump series also comes with high hydraulic efficiency and robust design to ensure the best overall outcomes for the users. Key Features of Series e-60 Centrifugal Pumps Series e-60 centrifugal pumps are combined with several key features: Energy Efficiency: The series e-60 centrifugal pumps are designed with perfection so users can get high-end energy efficiency from the same. It's combined with optimized impeller designs and hydraulic performance that further contributes to the overall energy-efficient features. Durability: Another outstanding feature of the series e-60 centrifugal pump is that it's created with high-quality and robust components to ensure its durability. The rotating bear is integrated with lubricated rotating bearings in Polyrex grease for seamless operations. Easy Maintenance: The series e-60 centrifugal pumps are designed to prevent the need for frequent maintenance without disturbing the overall piping connections. Versatility: Thanks to the availability of configurations and sizes, the series e-60 centrifugal pumps are flexible and adaptable to different system requirements. Applications The series e-60 pumps are designed for both commercial and industrial settings. Its typical applications are in: HVAC systems: The series e-60 pumps are ideal for moving chilled water, hot water, or condensed water in the HVAC industry. With this, the pumps help to both heat and cool the homes/buildings when required. Chilled water circulation: It's used for moving the cold water around the chiller system/pumps. Chiller pumps are ideal for circulating chilled water through the chiller system. Heating systems: The series e-60 pumps are also used in heat transfer systems that fit in with their temperature, pressure, and fluid properties. Industrial processes: From agriculture to chemical and power-generation plants, the series e-60 pumps are used in diverse areas of different industrial processes. Installation and Maintenance To install the series e-60 pumps, you can do the following: Read the manufacturer's guide and installation instructions thoroughly. Give a quick look at the product and see if it exhibits any sign of fault/damage Check for the pump alignment using a machinist level Check for the lubricants and the seal Use a hard foundation to support the pump Ensure that the pump base is at the perfect level so the pump shaft can be vertically aligned Maintain adequate spaces between the faces of coupling halves Follow the piping method as per the process mentioned in the manual Take care of the rest of the things, like perfect-size wiring and correct rotation of the pump on the pump casing. Follow the steps for grounding and priming flooded suction. Start and use your series e-60 centrifugal pump. Maintenance of the Series e-60 Pumps Check for lubricant level, vibration, and log-bearing temperatures Ensure that there is no leakage and check the mechanical seals Monitor for the pump foundation and hold-down bolts to ensure their tightness Grease the bearings every three months as required Thoroughly check the shaft alignment Monitor for any crack, damage, rust, or scale on the pumps Inspect the signs of wear in the impeller, casing, bearing, and frame adapter Get it checked by a professional annually Advantages and Benefits Some of the benefits of using Bell & Gossett Series e-60 centrifugal pumps are: High-end hydraulic efficiency Seamless serviceability Lasting pump life Noise-free operations Sturdy structure for durability Robust mechanical seal Maintenance-free bearings Long-term warranty Incredible pumping performance Install-and-forget solution. Thanks to the benefits listed above, you can stay assured of a lower total cost of ownership while using this pump. Conclusion Choosing the right centrifugal pump, like the e-60 series, is important for handling large quantities of liquids and ensuring good flow rates. However, it's recommended to never compromise on the brand and quality when finding the same. Bell & Gossett e-60 series definitely meets all the parameters for the perfect centrifugal pump. It's integrated with the best key features and benefits, along with easy maintenance/installation for providing the best outcomes. Explore more about the series of e-60 pumps for your specific needs. Connect with Pump Products to get the pump delivered to your home today!

Tips & How-To Topics

July 14, 2023

Choosing the Right Alarm System: A Comprehensive Guide by Alderon Industries

Pumps are susceptible to malfunctions like failure threshold. These issues can occur due to several reasons, like broken impellers, clogged filters, or power loss. However, you can avoid these malfunctions by choosing the right alarm system. An alarm system alerts users about any pump issues/malfunctions beforehand. With real-time alerts on operating conditions, users can bypass the blunder and ensure a well-functioning pump. To get the most benefits of an alarm system, you must buy it from a reliable manufacturer. Alderon Industries produces the most top-quality alarm systems for users. Their multi-purpose alarms are rated for indoor/outdoor applications and can be used for various applications. This guide will discuss Alderon Industries alarm systems and how you can choose their products for your pump-related requirements. Understanding Alarm Systems Alarm systems are devices that alert you to any possible nuisance related to pumps. These devices are intended to identify any high water conditions, pump failures, or freezes while ensuring seamless operations. Alarm systems are secured with panels/components that alert you beforehand about the issue. It provides adequate protection for your pumps and ensures their long-term durability. Moreover, it can be used for different pumps, including well pumps, sump pumps, and sewage pumps. There are several types of alarm systems for users: Wired - As the name suggests, these pump alarm systems ensure a connection between the sensors and the control panel through wires. Pro: Less prone to signal interference Cons: Installation complexity Wireless: Opposite to wired alarm systems, these alarms use WiFi or radio frequency to connect the sensors and control panel. The data is transmitted wirelessly, and the issues are detected instantly. Pro: Flexible sensor placement, easy installation Cons: Signal interference Monitored: These alarm systems come with a 24*7 operating monitoring service to inform users of any pump issues. Pro: Immediate response Cons: Monthly subscription fees Unmonitored: Instead of monitoring service, these pump alarm systems use lights, audible alarms, or instant notifications to alert users about the pump issues. Pro: No fees, affordable Cons: Efficiency depends on users' presence Hybrid: Hybrid alarm systems are a combination of both wired and wireless systems. They offer benefits of both these technologies ensuring dual reliability, efficiency, and convenience. Pro: Early warning signs, good security Cons: High upfront costs Depending on your requirements, you can choose the alarm systems for your pumps as per these varieties. Assessing Security Needs Before choosing the security alarm systems, you must assess the security needs for the following reasons: To ensure compliance with rules and guidelines Avoid legal issues or penalties Get better security as per your pump requirement Keep pumps secured against tampering or sabotage attempts Bypass choosing alarm systems that can overburden your pumps Get products at affordable rates. Also, make sure to consider a checklist of below factors before buying the alarm systems: Property size: Measure and choose the right property size for the installations Location: Ensure adequate right location for pump and alarm installation. Risks: Check for risks like power outages or false alarms Security requirements: Ensure good access control, system handling, intrusion detection, and system monitoring. Components of an Alarm System Alarm systems are secured with the following components: Sensors: They work as a main component that monitors relevant parameters and triggers alarms once any issue is detected Control panel: Once the sensor does its job, the control panel interprets/processes the data of the sensors and decides whether any alarm is needed. Keypads: It works as a central panel for your security system. You can use it for arming/disarming the alarm. Sirens: It's a loud sound-making noise that alerts people about some issue or pump malfunctions. Nowadays, alarm systems also include home automation integration and remote access that allows users to monitor and control the system remotely. It sends instant notifications to the users, so they can mitigate the issue and avoid the blunder. Choosing the Right Alarm System Provider Make sure to consider the below factors to choose the right alarm: Find a licensed and authorized service provider. Always check for their product diversity and availability. Go through the customer reviews before finalizing the alarm system provider. Don't fall for companies with excessive negative reviews. Check whether the company offers warranties on its products. Budgeting for an Alarm System An alarm system includes costs like: Equipment: Initial cost of the alarm system Installation: Cost of handling, altering, and installing the alarm systems. Maintenance: Maintenance cost for annual professional service and regular cleaning Monitoring cost: Monitoring fees on a monthly basis Depending on your requirement/preferences, find a product at a reasonable rate to maintain a balance between cost and efficiency. You can also try self-installation to cut down on the installation cost. However, it's only advised if you have done it earlier (or are professional). Installation and Maintenance A pump alarm system can be installed through the following steps (as per the wired alarm): Select a location Turn off the power to the pump. Mount the pump alarm. Install sensors Connect wiring (not required for wireless alarm systems) Test the alarm Adjust the settings if required. It's always recommended to choose professionals for your alarm installations as they are well-versed with the do's and don'ts of the process. You must choose reputed service providers like Alderon Industries' installation services to get expert assistance and seamless device functioning. Maintenance Tips Inspect the alarm regularly Check for wiring faults Always clean the sensors Prevent any dust or corrosion Get annual servicing done Additional Security Measures Along with the alarm systems, you must implement additional security measures like: Security cameras: Captures real-time data to identify any issues related to pump operations Motion sensor lights: Helps to detect any unauthorized access of pumps and ensures adequate surveillance Access control systems: Can control access and maintain audit trails to identify any pump-related faults Pump Products Looking for a high-quality pump alarm system by Alderon Industries delivered to your doorstep? Try Pump Products. We are leading pump distributors that can deliver reasonable and best-in-class products for your requirements. Contact us today to place your orders. Or visit Pump Products YouTube channel to know more.

Previous Blog

View All Blog

Next Blog